Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Newport News Homeowners
A garage door that won’t close leaves your home open to the street. One that won’t open traps your car and stalls your morning. Either way, garage door repair in Newport News is a same-day problem for most homeowners, and that’s exactly how we treat it. Our technicians have up to 9 years of experience and work on the door and the opener in a single visit, diagnosing by brand behavior instead of guesswork. We handle panels, springs, cables, tracks, rollers, and sensor calibration as a specialist trade – garage doors only – so the repair you get is measured against how that equipment is built to work. Call (855) 633-7752 for a free estimate and upfront pricing before anything is touched.

What Our Garage Door Repair Service Includes
Most repair calls come down to one of six things. Here’s what each one involves, when it’s time to call, and what we do when we’re standing in your driveway.
Panel Replacement
A dented or cracked panel throws off the whole door. Even a small buckle on one section can bind the hinges and make the door run uneven in its tracks. We replace the damaged section to match the profile of the door rather than talking you into a full replacement, and we check the hinges and stiles around it to confirm the damage didn’t spread. If the door is an older Clopay or Raynor profile, we verify the model before ordering so the new panel lines up with the sections still on the door.
Spring Repair
Springs carry the full weight of the door, and when one breaks the door either slams down or refuses to lift. Torsion springs run along the header above the door; extension springs run along the sides. Both are under heavy tension, and both are a job for a trained technician, not a weekend project – a spring that lets go under load can cause serious injury. We replace the failed spring and check the rest of the system for the extra strain the break put on the cables and opener. One spring repair runs $180 – $340, and a matched pair – usually the right call when one has failed – costs about twice that.
Cable Repair
The cables spool around the drums and keep the door level as it travels. A frayed or snapped cable shows up as a door that lists to one side, hangs crooked, or drops hard when it reaches the bottom. We replace the cables in pairs, because a cable that failed rarely leaves its partner in good shape, and we check the drums and bearings while the tension is off. Cable repair runs $130 – $250 depending on the setup.
Track Realignment
The tracks guide the door and the rollers ride inside them. A car bumper, a ladder, or a jammed roller can bend a track out of line, and the door starts scraping, sticking, or jumping the rail. We straighten or replace the affected section and re-level the track so the door travels smoothly through the full opening. Track realignment runs $120 – $240, and the sooner it’s done the less chance the door takes the rollers and hinges with it.
Roller Replacement
Rollers are the small wheels that let the door glide. Steel rollers wear flat, nylon rollers crack, and worn rollers make the door noisy, jerky, or hard for the opener to lift. We swap the worn rollers and inspect the hinges and bearings that carry the same load. Roller replacement runs $110 – $220, and it’s one of the cheapest ways to quiet a door and take strain off the opener motor.
Sensor Calibration
The safety sensors at the bottom of the tracks tell the opener to reverse if something is in the way. When they’re misaligned, dirty, or knocked out of position, the door won’t close, or it closes and immediately opens back up. We check the alignment, wiring, and the opener’s logic board, then recalibrate or replace the sensors as needed. This is a common call after a child’s ball or a bike knocks one sensor out of line, and it’s usually a quick fix.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We service LiftMaster and Chamberlain openers, including the newer Wi-Fi-enabled models where the app, the wall control, and the safety sensors all have to agree before the door will move. When a LiftMaster won’t close, we check the sensor circuit and the travel limits rather than replacing the logic board on a hunch. On the door side, we work on Clopay and Raynor sections, which matters because panel profiles and hinge patterns differ between those makes and the wrong panel won’t sit flush.
We also service Genie openers, Craftsman systems, Amarr doors, and Wayne Dalton equipment, which between them cover most of what’s already hanging in Newport News garages. Craftsman openers have their own quirks around the safety reverse and the wall console, and Wayne Dalton doors show wear in specific places we’ve learned to check first. Whether you have one of these brands or any other make, we can help.
Signs You Need Garage Door Repair Right Now
- The door won’t close, or reverses on its own. This is usually a sensor or track problem, and a door that won’t close leaves the house open. Call it in rather than leaving it propped.
- The door hangs crooked or one side lags. A cable, spring, or track issue is almost always the cause. Crooked travel puts stress on the opener and the hinges, and it gets worse fast.
- The opener runs but the door doesn’t move. The motor is working but the drive, spring, or cable isn’t doing its part. This often means the door’s weight is being carried by the wrong component.
- A loud bang from the garage, then the door won’t lift. That’s a classic broken spring. Don’t try to open the door by hand – the full weight is now on the opener and cables.
- The door scrapes, grinds, or jerks on the way up. Worn rollers, a bent track, or loose hinges. Left alone, small friction problems lead to bigger repairs.
Our Garage Door Repair Process – Step by Step
- 1
Phone diagnosis. We ask what the door is doing, what brand the opener is, and how old the door is. That conversation narrows the likely cause before we arrive, so we bring the right parts more often.
- 2
On-site inspection. We watch the door cycle, check the springs, cables, tracks, and rollers, and test the opener’s safety reverse and sensors. We use a spring gauge on torsion setups so we know the tension before we touch anything.
- 3
Written estimate before work starts. You get the diagnosis, the recommended repair, and a price in writing. Nothing happens until you’ve agreed to it.
- 4
The repair. We work with the tension off, replace what failed, and check the parts doing the same job so you’re not back on the phone in a month. We test the door manually and with the opener before we call it done.
- 5
Final test and walk-through. We run the door through several full cycles, confirm the safety reverse, and show you what we did. If a panel or track needs follow-up, you’ll know before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Newport News?
Garage door repair in Newport News typically runs $150 – $600, depending on what failed and how much of the system it took with it. A typical spring repair is $180 – $340 for one spring, with a matched pair about double that. Cable repair runs $130 – $250, roller replacement $110 – $220, and track realignment $120 – $240. A single panel replacement is $250 – $500, and opener repair is $120 – $320. These are estimated ranges, and the written estimate you get on site is what sets the final price.

What moves the number: the type of door (torsion springs cost more than extension), whether one part or several failed together, the brand and model, and whether the opener needs work too. To avoid overpaying, get the diagnosis in writing and ask whether a repair will hold or whether replacement makes more sense. Our free estimate includes the inspection, the diagnosis, and a line-item price. You approve it before any work starts, so the invoice doesn’t surprise you later. Call (855) 633-7752 for an exact quote – estimates are free.
Garage Door Repair Near Newport News – Our Service Area
We cover garage door repair across Newport News and the surrounding communities, including Hampton, Poquoson, Williamsburg, Portsmouth, Norfolk, and out toward Smithfield, Carrollton, Benns Church, and Gloucester Point. If you’re in Bethel Manor or Rushmere, we schedule the same kind of garage door repair and garage door repair calls we run in the city. Most repair calls in the Newport News area can be reached the same day when you call early. Start with our main Newport News Garage Door Repair Co page to see everything we handle.
Serving Newport News, VA – Our Local Coverage Area
We serve Newport News and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Newport News
Garage door repair is fixing the parts of the door and opener system that stop it from opening, closing, or running safely. That covers springs, cables, tracks, rollers, panels, and sensor calibration, plus the opener itself. We diagnose the cause and repair what failed rather than replacing the whole door when a targeted fix will do. Call (855) 633-7752 and we’ll talk through what your door is doing.
Most repairs take one to three hours on site. A spring or cable replacement is usually on the quicker side, while a track realignment or multiple-part repair takes longer. We’ll give you a time estimate with the written quote so you can plan your day. Call (855) 633-7752 for a time window.
Garage door repair in Newport News typically runs $150 – $600, and the written estimate sets the final price. Spring repair is $180 – $340 for one spring, cable repair $130 – $250, and opener repair $120 – $320. Panel replacement runs $250 – $500. Call (855) 633-7752 for an exact quote – estimates are free.
Yes, we service LiftMaster and Chamberlain openers, including Wi-Fi-enabled models, along with Genie and Craftsman. We test the safety reverse, sensors, and travel limits as part of the repair so the opener leaves working the way it should. Call (855) 633-7752 and tell us the model.
Yes, same-day service is available for most repair calls when you phone early, and emergency garage door service is a standing offering, not an after-hours surcharge. A door that won’t close is a priority, since it leaves the house open. Call (855) 633-7752 and we’ll get you on the schedule.
Yes, our repairs carry a warranty on the parts and labor we provide, and we’ll explain the terms in writing with your estimate. If something we fixed acts up, call us back and we’ll take a look. Call (855) 633-7752 for details on your specific repair.
Clear the area around the door and the opener so the technician has room to work. Move cars out of the driveway if you can, and make sure the garage is accessible. If you have the opener manual or model number, have it ready – it helps us diagnose faster. Then call (855) 633-7752 to book the visit.
Schedule Your Garage Door Repair Service in Newport News Today
When the door won’t move, we do. Call (855) 633-7752 for garage door repair in Newport News with same-day availability, emergency service, and a free no-obligation estimate. We quote the price in writing before any work starts, so you know the number before we pick up a tool. One call covers the door and the opener.
Written by the team at Newport News Garage Door Repair Co.